How to change car brakes essays

How to change car brakes essays If you do not know how to check or change your cars brakes, you will waste a lot of money and put your life in danger. Most people do not know how to check or change their brakes; it is fairly basic and not expensive if you can do it yourself. All new cars have disc brakes, so this essay will only detail instructions on them. First inspect your brakes to see if they need to be changed and if they do to what extent. Maybe you just need to replace the pads, or you need to replace the rotors and the calipers. Jack up the car. Use a hydraulic floor jack and jack stands so that you dont have to jack each side up separately only. Find a place on the frame to start jacking the car. This could be done from either the front or back, depending on which brakes are being done. Place the jack stands under the frame. Once the stands are in place, release the pressure on the floor jack. Once the car is jacked up you can remove the lug nuts and take the tires off. The calipers are the pieces that actually move when the brakes are applied, they push the pads on the rotors to stop the car. The pads can be easily viewed. If they are worn a significant amount, they should be changed. Generally, the brake pads will start squeaking, when brakes are applied once they are in need of change. The rotors can be check ed to see if they must be replaced by how worn they are. Generally they do not need replacement much, as long as the pads are changed when they need to be the rotors will last a while. If the rotors have large grooves in them they need to be replaced. The calipers need to be replaced if the vehicle pulls to a certain side only when braking, or if the brake pads on only one side wear down much faster than the other side. Once it is determined what need to be replaced, removal of the old parts can begin. An adjustable wrench will be easiest instead of having to use many different size wrenches. Different siz ...